Powered by BCN
Business Web Hosting

Replace Picnic Faucet with Faucet and Shank Assembly (add $22.00 & 2 pounds)

I need the 1/4 inch ID co2 line kit
I need the 3/8 inch ID co2 line kit (add $2.00)

Ball or Pin Lock Disconnects
Ball Lock Pin Lock (add $2.00)
Replace picnic faucet with Shank and Faucet Assembly (add $22.00 & 2 pounds)

I need a C-Keg (add $39.99 and 10 lbs)
 

Ball or Pin Lock Disconnects
Ball Lock Pin Lock (add $2.00)
Replace picnic faucet with Shank and Faucet Assembly (add $22.00 & 2 pounds)

I need a C-Keg (match to fittings) (add $39.99 and 10 lbs)

I need another C-Keg (match to fittings) (add $39.99 and 10 lbs)

1ea 1/4'' Female in-line Quick Disconnect	2ea 1/4'' Male in-line Quick Disconnect	3 inches co2 line.
Gas Disconnect	2ea Stepless Clamps and 2ea Screw Clamps	Liquid Disconnect adapted to shank thread.

Ball or Pin Lock Disconnects
Ball Lock Pin Lock (add $2.00)
Replace picnic faucet with Shank and Faucet Assembly (add $22.00 & 2 pounds)

I have 3/8 inch ID co2 line kit on my Kegorator.
I have 1/4 inch ID co2 line on my Kegorator.
I need a C-Keg (add $39.99 and 10 lbs)
 

Ball or Pin Lock Disconnects
Ball Lock Pin Lock (add $2.00)
Replace picnic faucet with Shank and Faucet Assembly (add $22.00 & 2 pounds)

This disconnect adapted to shank thread will make a quick connection to a standard shank nut like the that attaches to the product out of the on your tap. It will thread right in to factory towers fittings... no cutting or splicing. I don't want a disconnect adapted to shank thread.

I would like to add a ball type disconnect adapted to shank thread. (replaces disconnect, picnic faucet and product line with  a disconnect adapted to shank thread) (add $2.50) I would like to add a pin  typed disconnect adapted to shank thread. (replaces disconnect, picnic faucet and product line with  a disconnect adapted to shank thread) (add $3.50)

I have 1/4 inch ID co2 line on my system.
I have 3/8 inch ID co2 line kit on my system.
I need a C-Keg (add $39.99 and 10 lbs)
 

Replace Picnic Faucet with Faucet and Shank Assembly (add $22.00 & 2 pounds)
 

This disconnect adapted to shank thread will make a quick connection to a standard shank nut like the that attaches to the product out of the on your tap. It will thread right in to factory towers fittings... no cutting or splicing.

I would like to add a ball type disconnect adapted to shank thread add ($11.99) I would like to add a pin  type disconnect adapted to shank thread (add $11.99)